🍃2.4G High-Speed Remote Control Racing Car

Describe

This Rc Car is a 1:5 scale Baja-style gasoline buggy powered by a 29cc single‑cylinder, air‑cooled two‑stroke engine with a ROFUN 997 carburetor. It is rear wheel drive (2WD) with a rear axle brake, metal differential and reinforced suspension. Control is via a 2.4GHz radio system, and the chassis arrives almost ready with a built-in SC6V 2000mah battery for onboard electronics (transmitter AA cells not included).

Key Features

• Power system: 29cc single-cylinder air-cooled two-stroke gasoline engine (ROFUN 997 carburetor)
• Rear wheel drive with rear axle brake
• Metal differential and high quality exhaust pipe
• Second-generation wasteland tyre and second-generation wheel hub with red border (per images)
• 6mm shock absorption and second-generation reinforced front and rear suspension
• 2.4G 6CH remote control; about 150 meters remote distance
• 15KG all-metal gear throttle servo; 60KG metal gear steering gear (plastic case)
• SC6V 2000 mah battery (built-in) for electronics; transmitter requires 4×AA (not included)
• Car size (L×W×H): 817×480×255mm
• 8000RPH clutch; new proportioning kettle

Specifications

What’s Included

• 1 × RC Car (With Built-in Battery)
• 1 × Transmitter
• Accessories (Refer to the description)

Notes

• Charge the new car upon receipt; the first charge may take longer.
• After use, let the battery cool before charging or charge after about half an hour. Stop charging about half an hour after fully charged.
• Do not store the battery at low power. If unused for a long time, charge every 45–60 days to extend service life. Low power use can cause loss of control and irreversible battery damage.
• Battery performance is affected by temperature; capacity and power limit decrease in low temperatures.
• When charging: keep a safe distance from people and flammable/explosive materials, and supervise charging. If leaving, stop charging first.

Running-in (Break‑in) Guidance

1. Charge the car battery (electronics power) before first use.
2. Mix fuel oil according to oil grade. Rofun original FD grade mixing ratio: 1:40–1:50. Common FB grade ratio: around 1:25.
3. Perform a static run‑in of one tank. Within 3–5 minutes you can pull to mid/high speeds to reduce carbon deposits. After static run‑in of one tank, jogging another tank completes the process. Avoid climbing large slopes or prolonged high‑speed pulls during run‑in.
4. Operate this gasoline remote-controlled vehicle outdoors in open spaces. Avoid crowded areas, especially near the elderly and children.